|
X10 AM466 Appliance Module
This is just the item needed to control the christmas lighting outside. With the use of x10 module's we can change the display with out have to go out and move cords or unplug move the cord around and reset the timers. By running a few extra cords then hooking them to X10 you just sit it the comfort of your home and change the display.
[Thursday, January 24, 2008]
|
|
A few things about X-10
If this module (or any other X-10 module) doesn't always work or won't work in certain receptacles it is probably due to weak signal strength and/or interference. There are many web sites that explain this and how to remedy the problem. Electronic ballast energy-saving fluorescent light bulbs can render X-10 systems completely inoperative. Some computers, cell phone chargers, battery powered drill chargers, etc. can also cause X-10 to act unreliably. The problem applies to the X-10 system in general, not the AM466 module in particular. The module does make a loud mechanical "clunk" when its internal relay operates. I use several of these to control holiday lighting displays so they all turn on and off with the press of a single button, regardless of their location in the house. Very convenient and versatile, especially when used with the wireless controllers or the computer interface module.
[Thursday, November 29, 2007]
|
|
Loud, Don't always work
They work good enough for most applications, but don't work everywhere in the house all the time. X10 is known to not work in everyroom with every plug. You might find it doesn't work for plug far away from switch. Loud click noise during switch is not too classy.
[Monday, October 29, 2007]
|
