Economical method of removing a high percentage of raw feedwater contaminants (90 to 99% of all impurities). Ideal as pretreatment to a Nanopure* Quad-style, Nanopure II, or older Nanopure system for significantly extending the life of consumable ion-exchange cartridges.

Provides RO (reverse osmosis) purified water for volume requirements of 4, 8, or 10 gal./hr. (15, 30, or 40L/hr.) depending on membrane selection (order membranes separately). Maximum inlet pressure: 100psi (7kg/cm2). Minimum inlet pressure: 30psi (2kg/cm2).

System is wall mounted and operates from tap water line pressure. With built-in, solid-state periodic flush timer that automatically flushes the membrane when the system is in a standby condition (a full storage reservoir). Prevents accumulation of contaminants on the membrane.

Connects directly to a Nanopure Quad-style, Nanopure II, or older Nanopure system, glassware washer and storage reservoir without complicated plumbing.

Basic unit with 10 in. long (25cm), 5µm prefilter; wall bracket; 15 ft. (4.5m) in length of 1/2 in. O.D. tubing; 20 ft. (6m) in length of 3/8 in. O.D. tubing; adapters, and storage interlock jumper plug. Order membranes separately (see top right). Dimensions: 83/4L x 203/4W x 38 in.H (22 x 53 x 97cm). Shipping weight, 75 lb. (34kg). For 115V 60Hz.